Galvanized Roofing Corrugated Forming Machine Automatic Zigzag Roof Tile Machine

 

 

product show: roof and wall roll forming machine 

 

 

 

 

               

No		Technical Specification
1	Manual Uncoiler	Usage:It is used to support the steel coil and uncoil it in a turnable way. The steel coil is uncoiled by hand. Loading capacity:1.2T,Inner diameter: 500-508mm
2	Feeding Table	Put the raw material(steel plate) through the beach to manufacture and process, it can guarantee that the products are neat, parallel and everything is uniformity. Please refer to the equipment regulation to know the function of locate angle iron.
3	Main Roll Forming Machine	Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped
4	Hydraulic System Computer Control Cabinet	Power:5.5kw,Hydraulic oil: 40# hydraulic oil into the hydraulic oil tank ,the pump drive the cutter machine to begin the cutting job. The target piece`s length is adjustable and digit of it can be adjusted. Computed mode has two modes: automatic and manual one. The system is easy to operate and use PLC:EURA
5	Shearing Mechanism	It adopts the hydraulic drive and automatic location to decide the dimension and cut the target products. Material of blades: Cr12,quenching treatment
6	Output Table	It adopts welded steel and supported roller to transmit the products,which is used to collect the finished products.

 

other majored machine:roll forming machine

 

 

 

 

 

Packaging and shipping: roll forming machine

 

1). Tighten to container with steel wire rope and welded machine with container by angel iron 

 

2). Main forming machine and un-coiler is naked(If you need we can also packed with water-proof plastic)

 

3). PLC contral system and motor pump are packed in wooden box with water proof paper coverage

 

 

 

 

 

 

 

 

Advantage: roll forming machine

 

1)- we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country

 

 2)You can send your men to our factory. we will teach them how to operate the machine without

 

 training charges

 

 3)Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line  how to operate the machine.

 

4)Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support 

 

  

 

 

 

 

 

     FAQ

 

1), Q: Do you have after sales support?

 

A: Yes, we are happy to give advice and we also have skilled technicians available across the world. Weneed your machines running in order to keep your business running.

 

 

 

2), Q: How do your machines compare with other big companies in this market?

 

A: We are up to date with the latest technology and improve our machines accordingly

 

 

 

3), Q: How does your factory do regarding quality control? 
A: Quality is priority. MACTEC People always attach great importance to quality control from the verybeginning to the end of the production.  Every product will be fully assembled and carefully tested before

 

it's packed for shipment.

 

 

 

4), Q: Do you sell only standard machines?

 

 A: No, most of our machines are built according to customers specifications, using top brand namecomponents

 

 

 

5) Q: Can you make the machine according to my design or proto type? 
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us  

 

 

 

6)Q: How can we be assured that you will deliver us quality machine with spare parts? 
A:1. Customers to send the technical people to our factory for checking the quality.

 

 2.We can send the technicians to the buyer`s factory for the installation of the machine. 

 

 3.Good aftersales-service, its free of charge during the warranty period.

 

 

 

7)Q:What can you do if the machine broken?

 

A:Our machine's warranty period is 12months,if the broken parts can't repair,we can send the new parts replace the broken parts freel, but you need pay the express cost yourself. if after warranty period, we can look at negotiation to solve the problems, and we supply the technical support for the whole life of the equipment. 

 

 

 

8:How to play order: Inquiry---confirm the profile drawings and price----confirm the PI---arrange the deposit ---then OK

9:How to visit our company:

(1)Fly to Beijing airport:   By high speed train From Beijing Nan to Cangzhou Xi (1 hour),then we can pick up you at the station.

(2)Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao  to Cangzhou Xi(4.5 hours),then we can pick up you.

 

10:Q.Why your price is higher?

For example,2 kinds of apples here,2 different prices, why prices are still different?You can see the difference from the appearance directly,the cheap one some holes in the apple,it is going to fade.And make your stomach not good.The more expensive one,it is fresh,no scrath,no holes,no worm.The most important,you can if you give it to your girlfriend she will be happy!If your budget is a problem now,ok we offer you 3 standard machine with different prices and parameters.

 Like our machine,appearance good,the machine run well with life long tracking service.The most important little problem,running well to help you make more money!!!

 

 

 

 

 

 

Our company:

 

Our company is a professional manufacturer and exporter of cold-forming equipment and its whole automatic production line in North China. At recent years, large of our products have been sold to Russia, India, Australia, Armenia, and more than 50 countries and religions.

 

Our products are mainly used for C-type and Z-type purlins for steel structure production, bearing mould plate for high buildings and structured color plate or heated board for the maintenance of its roof covering and wall face, positive and negative plates for dust removal in environmental protection and so on .

 

Our marketing and design staff will respectfully listen to your definite requirements and demands ,design and produce your satisfactory equipment.

 

 

How to contact us?

Send your inquiry details below for detail quotation ,click”send” now !